Variety of interfaces for PC and video
A HDMI input is available for connecting to computers to receive signals from a digital source, such as a HDD recorder. There is a composite (BNC) input for connecting analogue video surveillance equipment and surveillance cameras. The monitor supports NTSC, PAL and SECAM signals.
The monitor can receive a Full HD signal (1920 x 1080) via HDMI and display its native resolution of 1280 x 1024.
Resolutions other than native ones can be reproduced 1:1, scaled proportionality or enlarged to fill the screen. This is helpful if non-native resolutions are received during set-up or when using applications that do not handle 1280 x 1024.
Underscan or normal view
The monitor supports both an Underscan and a normal screen view. The Underscan view shows 100% of the image and is ideal for looking at camera signals. The normal view shows 95% of the image.
Optimal view in any light
Thanks to its maximum brightness of 350 cd/m2, the monitor offers optimal visibility in any ambient light, even bright daylight.
Reduced Noise and Flicker
Thanks to its Y/C separation, the monitor offers images free from noise and flickering. During Y/C separation, the luminance signal (Y) and chrominance signal (C), i.e. the brightness and colour information from the image signal, are separated, preventing overlap artifacts. In addition, the monitor displays 16.77 million colors clearly and vividly.
The monitor is fitted with LED backlighting to control brightness and prevent flickering. This places far less strain on the eyes when the screen is being observed for extended periods of time.
Remote control included
You can operate the OSD menu, adjust the volume, and change between preset modes and input signals using the remote control. In addition, the monitor can be turned on and off using the remote control. The remote control is extremely practical for monitors in hard-to-reach areas or those hanging on a wall.
24/7 use guaranteed
The monitor is built for 24-hour use is impressively reliable. That is why EIZO gives a 2 years warranty.
Repairs and on-site exchanges are carried out via our service partner:
Please use the free service contact form:
Office hours are Monday-Friday from 08:00 a.m. to 04:30 p.m.
For repairs outside the warranty, you will receive a cost estimate without delay.
To keep your monitor looking like new at all times and to prolong the service life of your device, we recommend cleaning it regularly. Clean the casing and LCD surface as described below:
IMPORTANT: Never use thinner, benzene, alcohol (ethanol, methanol or isopropyl alcohol), scouring agents or other strong solvents as these may damage the casing and the LCD display.
Remove marks by wiping the casing with a soft cloth, which you have previously moistened with a mild cleaning agent. Never spray wax or cleaning agents directly on to the casing. (The manual contains exact details.)
Where necessary, the monitor surface may be cleaned using a soft cloth (for example a cotton cloth or glasses cloth). Stubborn marks can generally be removed by wetting the cloth with a bit of water to increase the cleaning strength.
We cannot make a direct recommendation. The output signal should be digital and should support the maximum resolution of the monitor.
The viewing angle relates to the angle, beneath which the contrast is better than 10:1. These are normally values of 160° to 178°. These values do not provide any information about what enormous differences in contrast may result within the viewing angle. The contrasts should not change significantly for users with a perpendicular view and a slightly side-on view. It must not make a difference whether the viewer is looking at the middle of the image or the edge of the image. How much the contrast stability varies with different LCD technologies is best checked using a measurement diagram or by a direct visual comparison. The more stable the contrast in the user's viewing frustum, the better the image rendering.
Contrast is the ratio of white to black and for monitors is normally stated as a dark room contrast from a controlled laboratory environment. Typical contrasts on printed paper are 6:1 for newspapers, 31:1 for laser printers, 49:1 for photo paper. For example, dark room contrasts cannot be achieved in the office because an extremely deep black cannot be achieved in normal ambient light – even with the screen turned off.