Reference

Using the Docking Station Function

This product is equipped with a LAN port and USB hub so that it can be used as a docking station. By connecting a USB-C cable, you can create a stable network environment even on notebook PCs or tablet devices that are not equipped with LAN ports. In addition, peripheral devices that support USB can be used, and smartphones can be charged.

  1. Connect a USB-C cable (CC150SS81G-5A or CC150SS81GW-5A).
  2. Connect the LAN cable to the monitor's LAN port.
  3. If necessary, connect a mouse, keyboard, or other device to the USB downstream port.

Attention

  • This function may not work depending on the PC you are using, your OS, and your peripheral devices. Contact the manufacturer of each device for information about USB compatibility.
  • Even when the monitor is in power saving mode, devices connected to the USB downstream port are operational. Due to this, the power consumption of the monitor varies depending on the connected devices, even in power saving mode.
  • When the main power switch of the monitor is off, a device connected to the USB downstream port will not operate.
  • When Compatibility Mode is set to "Off" and the monitor power is turned off, devices and LAN ports connected to the USB downstream port are not operational.

Note

  • The MAC address can be found on the back of the monitor. MAC address pass-through is not supported.
  • This product supports USB 5Gbps. When connecting to peripheral devices that support USB 5Gbps, high-speed data communication is possible.
    For USB-C connection, you can switch between display signal priority "HBR2 / USB2.0" and USB speed priority "HBR3 / USB3.2 Gen1" (see Signal Format - USB-C). The default setting is "HBR3 / USB3.2 Gen1" and the maximum USB transfer speed is 5 Gbps.
  • For USB-B connection, the LAN port cannot be used.

Specifications

LCD Panel

Type

IPS (Anti-Glare)

Backlight

LED

Size

31.5" (80 cm)

Resolution

3840 dots x 2160 lines

Display Size (H x V)

697.3 mm x 392.2 mm

Pixel Pitch

0.182 mm x 0.182 mm

Display Colors

8-bit colors

16.77 million colors

Viewing Angle (H / V, typical)

178˚ / 178˚

Response Time (typical)

Middle Tone Area

14 ms (overdrive setting: Off)

5 ms (overdrive setting: Enhanced)

Video Signals

Input Terminals

DisplayPort (HDCP 1.3/2.3 compatible) x 1, HDMI (HDCP 1.4/2.3 compatible)*1 x 2, USB-C (DisplayPort Alt Mode, HDCP 1.3/2.3 compatible) x 1

Digital Scanning Frequency
(H / V)

DisplayPort

Horizontal: 31 kHz to 134 kHz / Vertical: 29 Hz to 61 Hz, 69 Hz to 71 Hz (at 720 x 400)

HDMI

Horizontal: 31 kHz to 135 kHz / Vertical: 29 Hz to 61 Hz, 69 Hz to 71 Hz (at 720 x 400)

USB-C
(DisplayPort Alt Mode)

Horizontal: 31 kHz to 134 kHz / Vertical: 29 Hz to 61 Hz

Frame Synchronization Mode

59.5 Hz – 60.5 Hz

Max.
Dot Clock

DisplayPort

540 MHz

HDMI

600 MHz

USB-C
(DisplayPort Alt Mode)

540 MHz

  1. HDMI CEC (or mutual control) is not supported.

USB

Port

Upstream

USB-C (USB 5Gbps)*1 x 1, USB-B (USB 5Gbps) x 1

Downstream

USB-A (USB 5Gbps) x 3, USB-C (USB 5Gbps) x 1

Standard

USB Specification Revision 3.2

Communication Speed

5 Gbps, 480 Mbps, 12 Mbps, 1.5 Mbps

Supply Current

Upstream

USB-C (USB 5Gbps):
Maximum 94 W (5V/3A, 9V/3A, 15V/3A, 20V/3.5A (with USB-C downstream connection), 20V/4.7A)

Downstream

USB-A (USB 5Gbps):
Maximum 900 mA per port*2

USB-C (USB 5Gbps):
Maximum 15 W (5V/3A)*2

  1. Supports Pin Assignment E. The optional accessory CP200 (USB-C - DisplayPort) can be connected to the DisplayPort connector of the PC.
  2. The USB-A connector and USB-C connector on the side of the monitor can supply power even if the PC and the monitor are not connected via USB.

Audio

Audio Input Format

2ch linear PCM (32 kHz / 44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz)

Speakers

2 W + 2 W

Headphones

2 mW + 2 mW (32 Ω)

Input Terminals

DisplayPort x 1, HDMI x 2, USB-C (DisplayPort Alt Mode) x 1 (each shared with video signal)

Output Terminals*1

Headphone jack x 1, Stereo mini jack x 1

  1. When outputting audio from an external speaker connected to the stereo mini jack, do not connect a device to the headphone jack. When outputting audio from the monitor's speakers, do not connect devices to the headphone jack and stereo mini jack.

Network

Port

RJ-45 (USB LAN adapter)

Supported Operating Systems*1

Windows 11

Windows 10 (32 bit / 64 bit)

macOS Sierra (10.12) or later

Wired LAN

IEEE802.3ab (1000BASE-T),
IEEE802.3u (100BASE-TX),
IEEE802.3 (10BASE-T)

  1. EIZO support will end when OS vendor support ends.

Power

Input

100 – 240 VAC ±10 %, 50 / 60 Hz, 2.00 – 0.85 A

Maximum Power Consumption

196 W or less

Power Save Mode (standard value)

0.35 W (USB device not connected, external load not connected, DisplayPort input only)

Standby Mode (standard value)

0.3 W (external load not connected, only one video signal input)

Physical Specifications

Dimensions

712.2 mm x 438.9 mm – 634.0 mm x 292.3 mm – 318.3 mm (W x H x D) (Tilt: 35˚)

712.2 mm x 427.3 mm – 622.2 mm x 242.4 mm – 250.7 mm (W x H x D) (Tilt: 0˚)

Dimensions (Without Stand)

712.2 mm x 415.3 mm x 59 mm (W x H x D)

Net Weight

Approx. 9.4 kg

Net Weight (Without Stand)

Approx. 6.7 kg

Height Adjustment Range

195.0 mm (Tilt: 35˚) / 195.0 mm (Tilt: 0˚)

Tilt

Up 35˚, down 5˚

Swivel

90˚

Vertical Rotation

Right 90˚

Operating Environmental Requirements

Temperature

5 ˚C – 35 ˚C

Humidity

20 % – 80 % R.H. (no dew condensation)

Air Pressure

540 hPa – 1060 hPa

Transportation / Storage Environmental Requirements

Temperature

-20 ˚C – 60 ˚C

Humidity

10 % – 90 % R.H. (no dew condensation)

Air Pressure

200 hPa – 1060 hPa

Accessories

For the latest information about accessories, refer to our web site.

(www.eizoglobal.com )